Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

£9.9
FREE Shipping

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

I scouted the Internet and found that, low and behold, if the build plate does not have a rough surface, there will not be anything for the UV resin layer to adhere to. I eventually took an angle grinder to the play to rough up the surface but it only made a marginal difference.

Just found your blog and I’m hooked with your attempts to squeeze every ounce of performance out of this machine.So where to start, I cleaned my entire print head in 99% IPA, then gave the print bed a good sanding to rough the surface up to assist with adhesion of the magnetic plate, after the rough up I cleaned again with IPA. tHE onlt "too much" platen adhesion prolem I have expedrienced was with that damned useless 'water washable' resin. but mostly you always have to adjust this depending on the model you want to print to compensate for factors such as contact surface, height and weight. One disclaimer – I didn’t was the prints properly, so there is some excess resin (and yeah, I am aware of not having gloves, but small quantities of resin for short period of time does not trigger a reaction for me). Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.

No more spatula scraping and breaking prints from fragile materials (I am looking at you, Elegoo Standard! The plate is very secure on the magnetic base and doesn't want to move, however using the little tabs will come of when you want it to. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss. If one had dealt attentively with the topic, one would have realized that one must print out a spacer with the old platform BEFORE modification, which must be inserted between the flag and threaded spindle.I printed it on my Ender 3, flipped upside-down with supports and it works fine, although on my original Mars the. Some mention that the magnetic part sticks well to the build plate, the adhesive is strong, and the backing sticks very well to it.

After printing, the flexible build plate can be detached from the magnetic base and the print can be removed more easily by gently bending it. apart from the relevelling I changed NO settings on the printer and set it of to print an adaptor for an Airsoft RIF, 56 minutes later and I have 2 adaptors firmly stuck to the flex plate, gave them a push (wearing gloves) and they were firmly stuck to the plate, grabbed a tab to remove the plate as as I pulled the plate off, one adaptor popped off into my hand, the other stayed on, I gave the flex plate a slight bend and the other adaptor popped off. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform. Simply align the magnetic sticker, remove the paper backing from the adhesive, and attach the magnet to the build plate.I also replaced their logo with the Elegoo "e" on the front of the build plate as I think it fits better with the machine's design. Fortunately, there are companies laser cutting an arbitrary shape out of them on laser or water cutter. Mars Onboard Build Plate Dripper While I like the idea of the Mars supplied device for leaning your build plate while dripping clean, it takes two hands and you need a place to keep it when out of service. The enclosure can be closed and the buildplate rotated slightly so that the drops falls of at a corner. Our build platform is equipped with a large non-slip hexagon socket screw for effortless leveling and remains stable and long-lasting level during printing.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop